P Type 500micron Backwashing Water Filter

Model NO.: YL-4P Usage: Water Treatment Style: Tube Certification: CE, SGS Flow Rate: 80 T/H Work Temperature: Less Than 90 Centigrade Wide Range of Filtering Precision: D=0.5-2.0mm Drain: 1 Inch Loss of Pressure: Less Than 0.015MPa Specification: CE, SGS HS Code: 842121999 Type: Backwashing Filter Motive Force: Electric power Performance: Efficient Filtration Item: Backwashing Drainage Water Filter Material: Carbon Steel/Stainless Steel Work Pressure: Less Than 1.0 MPa Inlet and Outlet: 4 Inch Filtraion Rate: 400 Micron Trademark: YLD Origin: Jiangyin, Jiangsu P Type 500micron Backwashing Water Filter

Structure and work principle
P type backwashing drainage filter is made up of the high quality carbon steel cartridge, stainless steel wedge strainer of special structure, butterfly valve and drainage device. When the filter works, the butterfly valve will be open, the water flow gets into the filter through the entrance, after the filtering with the strainer to the exit. When the filter requires the drainage, the butterfly valve will close and the drainage valve will open. After the filtering with the first half of the strainer, part of the water flows into the system through the exit, The rest water will flow from the outer side of the second half of the strainer to the inner side. And it is discharged from the drainage exit. It is with the use of automatic backwashing of the strainer. Then during the whole washing process the system could run normally without stop.
Technical feature
Work temperature: Less than 90 centigrade
Work pressure: Less than 1.0 MPa
Wide range of filtering precision: D=0.5-2.0mm
Large quantity of the filtered water: Low pressure loss, large quantity of the water treatment, reaching 2850t/h per filter
Long service life: Made up of belt-shaped wedge strainer of stainless steel and high quality carbon steel cartridge.
Low comprehensive cost: No disassembly and replacement of the strainer, the service life could reach 20 years.
Convenient operation and high efficiency: No bypass connection, no repair, effective filtering and backwashing

Function and purpose
P type backwashing drainage filter is applicable for all kinds of water supply systems, process water system and industrial cooling water, especially the 24-hour-running system. It could filter the mechanical impurity in the water and make sure the safe and reliable running of the system and the equipment.

Installation and use
P type backwashing drainage filter should be installed horizontally or vertically. When it is installed vertically, the direction of the water flow should be from top to bottom. Please take care the arrow direction on the shell should be the same with the water flow. The butterfly valve is open during the normal running. When taking the drainage, close the butterfly and turn on the drainage valve until the clean water is discharged. Close the drainage valve and turn on the butterfly valve, then the drainage process is finished and the equipment gets into the normal running state.

Model	A (mm)	Φ (mm)	D (mm)	Inlet and outlet diameter		Max flow (T/h)	Weight (Kg)
				mm	in
YL-2P	410	159	25	50	2	19	13
YL-2.5P	410	159	25	65	2.5	28	15
YL-3P	500	219	25	80	3	50	18
YL-4P	580	219	40	100	4	80	25
YL-5P	640	219	40	125	5	125	39
YL-6P	730	273	50	150	6	180	55
YL-8P	900	325	50	200	8	320	85
YL-10P	1050	377	50	250	10	490	120
YL-12P	1300	426	65	300	12	710	150
YL-14P	1450	478	65	350	14	970	220
YL-16P	1600	530	65	400	16	1260	280
YL-18P	1800	630	100	450	18	1590	350
YL-20P	2000	720	100	500	20	1970	420
YL-24P	2200	800	100	600	24	2850	580

Contact us if you need more details on Water Filter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Filtration、Water Treatment Plant. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Filter > Automatic Backwash Filter