Condenser Brass Tube on-Load Sponge Ball Cleaning System
Model No.: YL-JC-600
Model NO.: YL-JC-600
Usage: Environmental Protection
Certification: CE, GS
Ball Collector: Carbon Steel Shell,Ss Filter Screen
Cleaning Type: Rubber Ball Automatic Cleaning
Working Pressure: 0.2-1.6MPa
Control: Automatic Cleaning,Manual Timely
Transport Package: Plywood Case Packaged Into Container
Origin: Jiangyin, China
Type: Condenser Cleaning Device
Motive Force: Electric power
Performance: Tube Cleaning Device
Ball Pitcher: Carbon Steel,Ss
Mesh Screen of Ball Collector: 1000 Micron-5000 Micron
Power Supply: 200--1000W
Cleaning Ball: Rubber,Ss
Specification: to be practical
HS Code: 842121999
Condenser Tube Cleaning Device
Condenser and Concrete tube scaling is one of the most underestimated problems in the industry. It results in decrease of productivity and efficiency of the plant. We handle the two major methods used to fight the scaling. We provide online Condenser Tube Cleaning Systems (CTCS) along with Condenser Cleaning Sponge Balls made from Food Grade-A natural rubber to clean out the scaling. Furthermore, we also provide Offline Bullet Cleaning with our own skilled labor, machines and bronze bullets which can be performed during overhaul and shutdown. For the purpose of tackling similar problems with the Concrete Industry we have our Vulcan Clean-out Balls also made from Food Grade-A natural rubber.
The cleaning balls are introduced and removed from the system through the ball collector. The collector interior is partitioned by a screen into two areas. When the collector is in the ball collection or retention mode the screen separates the collector inlet and outlet. When the screen is positioned such that the inlet and outlet are no longer separated, the balls are conveyed by the flow to the injection site(s). The balls are injected into the cold leg of the circulating cooling water system serving the condenser or heat exchanger so as to achieve a random distribution within the stream. Because the balls (when deaerated) have nearly the same specific gravity as the cooling water, they follow the same path as the water within which they are suspended.
Ball Collector in the open (recirculation) mode. Both the inlet and outlet of the collector are on the same side of the collector screen.
Ball Collector in the collection (ball capture) mode. The screen has been rotated so as to separate the inlet and outlet of the collector.
When the ball charge is correctly sized, each tube is treated by a ball approximately once every five minutes. When the balls have passed through the tubes and enter the cooling water discharge line they are intercepted by the ball strainer(s). When the balls meet the strainer screen they are driven along the screen surface to the ball extraction port located at the point where the down stream extremity of the screen meets the spool body. The balls are then conveyed by a special pump through the ball collector and once again to the injection site.
4. System Description
4.1. Strainer Section
4.2. Ball Recirculating Unit
4.3. Sponge Rubber Balls
4.4. Ball Injection
4.5. Automatic Operation and Monitoring System
4.5.1. Automatic Operation
4.5.2. Monitoring System
4.6. Material Selection
5. Factors Affecting Ball Circulation
5.1. Coarse Particles (Debris) carried into the Heat Exchangers and Leading to Tube
5.2. Dead Spots and Vortexes
5.3. Waterbox and Tube Sheet
5.4. Balls Passing the Tubes
5.5. Balls at Strainer Section
5.6. Ball Recirculating Pump
Characteristics of condenser online cleaning device
1.energy saving,Min 10% and Max 40% ,99%rubber ball could be collected.
2, one-time investment cost could be recovered within one year.
3, automatic on-line cleaning to ensure without fouling, corrosion on the condenser.
4, avoid and eliminate air conditioner engine from abnormal pressure during operation.
5, prolong the service lifespan of compressor and the pipeline.
6, ensure the condenser to be in high heat transfer efficiency.
7,complete physical processing, cost- saving in chemical treatment, environmental protection.
8, full PLC computer programming control, no technicians maintainenance and regulates the frequency of automatic cleaning condenser every day.
1. Performance: ball collecting rate ≤95%
2. Input voltage: 380V / 50HZ
3. Power: ≤5KW
4. Work environment requirements: Temperature ≤55 ºC, humidity ≤95 ºCRelative
5. Pressure loss: 0.003MPa-0.05MPa
6. Water temperature: ≤50 ºC
7. Working Pressure: ≤1.6MPa.
Contact us if you need more details on Condenser Cleaning System. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Tube Cleaning Device、Condenser Tube Cleaning. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Condenser Cleaning Device
Premium Related Products