Water Treatment Material Ion Exchange Resin for Water Purification

Model NO.: YL-I-0.5


Resin: 001×7 Strong Acidic Cation-Exchange


Relative Humidity: Less Than 95%(25centigrade)


Hardness of Effluent: Less Than 0.03mmol/L


Free Chlorine: Less Than 0.3mg/L


Iron Content: Less Than 0.3mg/L


Working Principle: Ion Exchange


Inlet Mode: Pipeline


Trademark: YLD


Origin: Jiangyin, Jiangsu, China




Control Mode: Flow Rate Type, Time Type


Working Ambient Temperature: 5-50centigrade


Hardness of Raw Water: Less Than 8mmol/L


Inlet Water Pressure: 0.2 to 0.4mpa


Suspended Solid: Less Than 0.5mg/L


Installation: Vertical Type


Certification: CE


Heating Mode: No


Specification: CE, GSG


HS Code: 8421219990


Water Treatment Material Ion Exchange Resin for Water Purification



What is Water Softener?





1. Water softener is such kind of equipment that used to reduce the hardness of the water.



2. It's main functions: Remove the dissolved Ca+, Mg+, etc., activated the water quality,

Sterilization and algae killing, anti-fouling and dissolve fouling.



3. It can be used for air conditioning system supplies water softening and daily life water treatment etc.



4. The system has widely applied in hot water boiler, heat exchange system, industrial cooling system,

Central air-conditioning system and other water equipment system.





Control mode of fully Automatic Water Softener

(1)Single tank time type: It adopts microcomputer to control the time, when operation of the equipment reaches setting time, it will automatically enter the regeneration condition, which can be regenerated for once a day or once for some day.

(2)Single tank flow type: It adopts control of turbine flow or electronic flow sensor, when the yield of softener reaches preset flow it will automatically enter the regeneration condition, which can be recycled many times every day.

(3)Double tanks flow type: Which could be divided into one running-one alternating, and simultaneous running and separately regeneration.

(4) One running and the other alternation type: One tank is running while the other is alternating, when water yield of operating tank reaches the preset flow rate, it will enter the regeneration stage, meanwhile, the other tank will enter the working state, these two tanks work and regenerate alternatively to realize continuous water supplying of 24 hours.

(5)Simultaneous running and separately regeneration type: Two cans running simultaneously, when the flow rate reaches the setting rate, one tank (can) will regenerate and the other tank will output water continuously, when the first regeneration tank finish the regeneration it will enter the working stage, the other one will enter regeneration stage, these two cans finish regeneration and enter working state simultaneously.

Hardness of raw water	Less than 8mmol/L	Power supply	220V/50HZ
Hardness of effluent	Less than 0.03mmol/L	Control mode	flow rate type, time type
Inlet water pressure	0.2to 0.4Mpa	Resin	001×7strong acidic cation-exchange
Free chlorine	Less than 0.3mg/L	Working ambient temperature	5-50Centigrade
Suspended solid	Less than 0.5mg/L	System water temperature	5-45Centigrade
Iron content	Less than 0.3mg/L	Relative humidity	Less than 95%(25Centigrade)

Category	Model	Recommended water yield (M³/h)	Tank size Diameter *Height(mm)	Salt box (L)	Amount of resin(KG)
Single-valve and single-tank	YL-I-0.5	0.5	200×900	25	20
	YL-I-1	1	250×1400	60	40
	YL-I-2	2	300×1400	200	60
	YL-I-3	3	350×1400	100	80
	YL-I-4	4	400×1650	200	120
	YL-I-5	5	500×1750	300	180
	YL-I-6	6	300×1900	350	240
	YL-I-10	8-10	750×1900	500	360
	YL-I-18	42-18	900×1900	800	520
	YL-I-25	18-25	1000×2200	1000	720
	YL-I-35	25-30	1200×2400	1500	1000
	YL-I-50	35-50	1500×2500	2000	6400
Dual-valve and dual-tank (simultaneous operation and respective regeneration)	YL-II-36	24-36	900×1900	800	1040
	YL-II-50	36-50	1000×2200	1000	1440
	YL-II-70	50-70	1200×2400	1500	2000
	YL-II-100	70-100	1500×2500	2000	3200
Dual-valve and dual-tank(One for use and the other for standby)	YL-II-1	1	250×1400	60	80
	YL-II-2	2	300×1400	100	120
	YL-II-3	3	350×1400	100	160
	YL-II-4	4	400×1650	200	240
	YL-II-5	5	500×1750	300	360
	YL-II-6	6	600×1900	350	480
	YL-II-10	8-10	750×1900	500	720
	YL-II-18	12-18	900×1900	800	1040
	YL-II-25	18-25	1000×2200	1000	1440
	YL-II-35	25-35	1200×2400	1500	2000
	YL-II-50	35-50	1500×2500	2000	3200

Contact us if you need more details on Water Softener. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Softener Purification、Water Treatment Plant. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Softener > Household Water Softener