Automatic Drain Valve Hydrocyclone Sand Separator for Mining Plant

Model NO.: YLXC-200II Working Principle: Centrifugal Water Turbidity: <100ntu Water Head Loss: <0.25MPa Trademark: YLD Origin: Jiangyin, China Material for Housing: Carbon Steel,Stainless Steel304/316,etc Working Pressure: 0.2-1.6MPa Water Output: <20ntu Working Temperature: Ambinent temperature Specification: to be practical HS Code: 842121999
ntroduction 
Hydro cyclone Separators are effective in removing suspended particles from any flow stream of water where the specific gravtity (density) of the particle(s) is heavier than the water it is in; the more significant the difference in the gravity between the water and the particle, the greater the efficiency of the removal process.  Depending on the specific gravity of the particle and the viscosity of the flow stream, very small and denser particles can be removed. 
NOTE: Particulate removal can be enhanced if multiple passes of the stream can be achieved.  

Consider a separator's use where any source of water contains contanimants with a weight of 2.6 specific gravity or higher, such as well water to remove sand.  Separators are also excellent for use as a pre-removal device for filters with river or ditch water that contain high levels of sand or other large organic debris.

Applications would include, but not be limited to, wells, industrial processes, water recycling and reuse, river and ditch water intake systems, food processing nozzle systems and irrigation water.
An automatic purge controller and valve can be used on all applications.  This eliminates the need for manual flushing, turning the separator into an automatic system. 
Small separators can be wall mounted, hung on the main piping, or placed on legs if desired.

 Cyclone desander is designed and manufactured on the principle centrifugal subsidance and indensity difference ,solid particles in the fluid swirling and flowing in the sand separator. It is a new separation device which combines filtration device ,when the water flow is below required pressure, it flows from the inlet tangentially enters the sand filter, and generates violent whirlpool, since the sand and water is different in density, under the comprehensive action of centrifugal force, centripetal force and fluid drag force ,the low density water rises and discharged from the water outlet, high density sand is discharged out from the sewage outlet at bottom of the device .individual particles joint floating along the water flow will be filtered by the second stage filtering device, so as to realize the purpose of sand removal.

Techanical parameters sheet 

model	Capacity (m³/h)	Input pressure(Mpa)	Max partition diameter(mm)	partition size(um)	Desanding efficiency	dimension (mm)			Water Inlet (mm)	Water outlet (mm)	Sewage outfall  (mm)	Weight (kg)
						H1	L	H2
YLXC-25II	18	0.15-0.4	1.5	30-70	>96%	850	273	1100	25	40	25	40
YLXC-40II	25	0.15-0.4	2	40-100	>96%	1050	273	1250	40	50	25	50
YLXC-50II	40	0.15-0.4	3	40-100	>96%	1100	273	1360	50	65	25	60
YLXC-80II	60	0.15-0.4	3	40-100	>96%	1150	273	1410	80	100	40	120
YLXC-100II	100	0.15-0.4	6	50-150	>95%	1200	325	1450	100	125	40	130
YLXC-125II	160	0.15-0.4	10	74-200	>95%	1250	377	1500	125	150	50	180
YLXC-150II	200	0.15-0.4	10	74-200	>92%	1350	426	1600	150	200	50	240
YLXC-200II	250	0.15-0.4	16	74-220	>92%	1450	530	1700	200	250	65	350
YLXC-250II	300	0.15-0.4	16	80-230	>92%	1550	630	1800	250	300	65	400

Contact us if you need more details on Cyclone Desander. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cyclone Sand Separator、Cyclone Separator. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Cyclone Sand Separator