Automatic Backwash Self Cleaning Stainless Steel Cartridge Water Filter

Model NO.: YLD Usage: Environmental Protection, Chemical Industry Style: Vertical Certification: CE, SGS Material: Carbon Steel/Stainless Steel Working Temperature: Less Than 100centigrade Filtering Precision: 25~300micron Flow: 70t/H Drain: Dn50(2inch) Transport Package: Plywood Case Into Container Origin: Jiangyin, Jiangsu Type: Self-Cleaning Motive Force: Electric power Performance: Efficient Filtration Item: Automatic Backwash Self Cleaning Water Filter Working Pressure: 0.6 1.0 1.6MPa Pressure Loss: Less Than 0.015MPa Interface: Flange Inlet and Outlet: Dn100(4inch) Trademark: YLD Specification: CE, SGS HS Code: 842121999 Automatic Backwash Self Cleaning Stainless Steel Cartridge Water Filter

 
Product introduction
Multielement Self-Cleaning Filter is applicable for filtering the grain impurities in the high flow, high speed, and low viscosity liquid. Multielement self-cleaning filter is a mechatronic equipment with the features of reasonable design, high efficiency of filtering, low running cost and successive filtering during the backwashing filtering. It could be extensively applied in the fields like metallurgy, chemical industry, power, injection water of the oil field and environmental Water Treatment.

Work principle
The filtered liquid gets into the filter from the entrance and into the strainer from the lower plate. The liquid flows from the inner side of the strainer to the outer side and gets out from the filter through the exit of the filter cartridge. The impurity from the backwashing is drained from the drainage entrance.

Process description
When the liquid flows from the inner side of the strainer to the outer side, the solid grain was held in the inner side of the strainer. With the increase of the pollutant, the pressure difference between the polluted side and the clean side is also growing. When the pressure difference reaches the set value, the automatic backwashing will start to work.

Design feature of the multi- Core self- Cleaning filter
1. The filter takes the internal mechanical structure of self-cleaning to realize the backwashing function in the true sense. It could clean the impurity on the strainer thoroughly. There is no dead angle for washing and no flux attenuation so that the filtering efficiency and the service life are assured.
2. The filter takes the wedge strainer of 304, 316L stainless steel with high strength, precision and corrosion resistance. The filtering precision is 251im.
3. The filter with few wearing parts, no consumable, low maintenance cost. The operation and management are simple.
4. The control system of the filter is with sensitive response and precise operation. The backwashing pressure difference and the time could be adjusted flexibly according to the different water source and filtering precision.

Model	capacity (m3/hour)	Inlet and outlet diameter (mm)	Drainage diameter (mm)	D (mm)	H (mm)	H1 (mm)	H2 (mm)
YLF-50	70	DN50	DN50	300	1690	265	640
YLF-80	80	DN80	DN50	350	1720	265	660
YLF-100	120	DN100	DN50	400	1760	265	680
YLF-200	200	DN200	DN80	500	1860	290	715
YLF-250	280	DN250	DN80	600	1930	290	755
YLF-300	450	DN300	DN100	700	2040	335	755
YLF-350	600	DN350	DN100	800	2105	335	770
YLF-400	800	DN400	DN100	1000	2220	335	800
YLF-500	1000	DN500	DN100	1200	2360	365	825

Contact us if you need more details on Water Filter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Treatment Plant、Water Treatment. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Filter > Automatic Backwash Filter