P Type Backwash Filter with 500 Micron Perforated Mesh

Model NO.: YL-4P


Usage: Environmental Protection, Chemical Industry, Water Treatment


Style: Vertical


Certification: CE, SGS


Filtration Degree: 450 to 3500 Micros


Working Temperature: Less Than 100 Centigrade


Electricity Power Supply: 220V,50Hz,


Inlet and Outlet Diameter: Dn100mm/4inch


Trademark: YLD


Origin: Jiangyin, China




Type: Water Filter


Motive Force: Electric power


Performance: Efficient Filtration


Material: Carbon Steel,Ss304,Ss316,Ss316L,Ss2205


Working Pressure: 0.6/1.0/1.6MPa


Mesh: Ss304/Ss316/Ss316L


Flow Rate: 80t/H


Drain: 25mm/1 Inch


Specification: to be based practical size


HS Code: 842121999




P Type Backwash Filter With 500 Micron Perforated Mesh



Structure and work principle

P type backwashing drainage filter is made up of the high quality carbon steel cartridge, stainless steel wedge strainer of special structure, butterfly valve and drainage device. When the filter works, the butterfly valve will be open, the water flow gets into the filter through the entrance, after the filtering with the strainer to the exit. When the filter requires the drainage, the butterfly valve will close and the drainage valve will open. After the filtering with the first half of the strainer, part of the water flows into the system through the exit, The rest water will flow from the outer side of the second half of the strainer to the inner side. And it is discharged from the drainage exit. It is with the use of automatic backwashing of the strainer. Then during the whole washing process the system could run normally without stop.





Other techanical parameters sheet.

work pressure: less than 1.0MPa

work temperature: less than 100 Centigrate

Pressure loss: less than0.015MPa

Filtering precision: 300-100 micron

Other configurations: working pressure, filtration degree and the filter specification could be manufactured based on buyers' special requirement. The flange connection dimension is according to GB-9119.9-88.



Installation and use

P type backwashing drainage filter should be installed horizontally or vertically. When it is installed vertically, the direction of the water flow should be from top to bottom. Please take care the arrow direction on the shell should be the same with the water flow. The butterfly valve is open during the normal running. When taking the drainage, close the butterfly and turn on the drainage valve until the clean water is discharged. Close the drainage valve and turn on the butterfly valve, then the drainage process is finished and the equipment gets into the normal running state.

AAA:

01. What is the capacity (m3/hour)you required for this equipment?

02. What is the material for this filter?

Carbon steel ?or stainless steel (SS304/SS316)?

03. What is the filtration degree?

500 micron or 1000 micron?





Technical parameters sheet

Model	A (mm)	Φ (mm)	Weight (Kg)	Inlet and outlet diameter		D (mm)	Max flow (T/h)
				mm	in
YL-2P	500	159	50	50	2	25	19
YL-2.5P	500	159	50	65	2.5	25	28
YL-3P	550	219	60	80	3	25	50
YL-4P	600	219	70	100	4	40	80
YL-5P	650	219	80	125	5	40	125
YL-6P	800	273	100	150	6	50	180
YL-8P	900	325	150	200	8	50	320
YL-10P	1000	377	180	250	10	50	490
YL-12P	1100	426	200	300	12	65	710
YL-14P	1200	478	266	350	14	65	970
YL-16P	1350	530	350	400	16	65	1260
YL-18P	1500	630	445	450	18	100	1590
YL-20P	1700	720	500	500	20	100	1970
YL-24P	1900	800	620	600	24	150	2850

Contact us if you need more details on Water Treatment. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Filter Housing、Water Purifying Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Filter > Automatic Backwash Filter