5 Micron Single and Double Length Stainless Steel Bag Filters

Model NO.: YL-2-450

Usage: Environmental Protection, Chemical Industry, Water Treatment

Style: Vertical

Certification: CE, SGS

Filter Bag: PP, PE

Connection Type: Clamp,Flange

Working Pressure: 0.2--0.6MPa

Flnage Standard: China Standard,ANSI,etc

Item: Stainless Steel Bag Filters

Specification: to be practical

HS Code: 842121999



Type: Bag Filter

Motive Force: Pressure

Performance: Efficient Filtration

Filter Vessel: Ss304/Ss316/Ss316L

Filtration Degree: 10-20 Micros

Open Cover: Rock Arm Cover

Surface Coated: Abrasive Blasting or Sight-Gloss

Fbasket Strainer: Ss304/Ss316

Trademark: YLD

Origin: Jiangyin



5 Micron Single And Double Length Stainless Steel Bag Filters

Stainless Steel Bag Filters 
The filter bags for Filter bag housing is standard #1(7*17 inch) or #2(7*32 inch) bag, With holding ability from 1 bag (single bag) up to 12 bags. 
Standard design pressure is 1.0mpa. It could also be customized for higher pressure.

The sizes of these pores are between the  0.1-300 micron.
The capacity depends on the surface area from the bags. Bigger systems can clean up to more than 500 m3 /h (multi bag filters)
There are special bags for various chemicals.

Stainless Steel Bag Filters Engineering

The liquid flows from the top of the filter house (manufactured in either stainless or epoxy coated carbon steel) and is distributed equally amongst the bags. The liquid comes out at the bottom leaving the dirt behind.
Since the bag is locked in at the top of the vessel all the dirt is trapped inside the bag. The filter vessel never requires cleaning after use.
Bag filters systems are applied is various industries solutions. Treated liquids include: milk products, paint, lime, beer etc.
It can also help you with replacement from various filter bags.

Features

Highly durable SS316/304 material

Positive sealing arrangement to avoid bypassing

Lower pressure drop & high flow rates

Multiple bag filter / duplex bag filter unit designs available

AAA:
 
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this bag filter?
Stainless steel (SS304/SS316)?
03. What is the working pressure for it?
04. What is the filtration degree?
10 micron or 200 micron?
 
Technical parameters of stainless steel bag filters: 

Model	Flow rate (T/H)	Inlet and outlet diameter(mm)	Size	Specification	Bag specification (mm)	Filter area (m2)
YL-1-219	20	DN50	219*410	Single bag	180*410	0.23
YL-2-219	40	DN65	219*810	Single bag	180*810	0.46
YL-2-400	50-80	DN80	400*810	Two bags	180*810	0.92
YL-2-500	120	DN100	500*810	Three bags	180*810	1.38
YL-2-600	150	DN125	600*810	Four bags	180*810	1.8
YL-2-650	160	DN125	650*810	Five bags	180*810	1.84
YL-2-750	200	DN150	750*810	Six bags	180*810	2.3
YL-2-800	220	DN150	800*810	Eight bags	180*810	2.5
YL-2-850	240	DN200	850*810	Nine bags	180*810	2.76

 
 

Contact us if you need more details on Water Filtration. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Filter Housing、Bag Filters. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Filter > Bag Filter