304 Stainless Steel Bag Filter Housings

Model NO.: YL-2-219


Usage: Environmental Protection, Chemical Industry, Water Treatment


Style: Vertical


Certification: CE, SGS


Filter Bag: PP, PE


Connection Type: Clamp,Flange


Working Pressure: 0.2--0.6MPa


Flnage Standard: China Standard,ANSI,etc


Trademark: YLD


Origin: Jiangyin




Type: Bag Filter


Motive Force: Pressure


Performance: Efficient Filtration


Filter Vessel: Ss304/Ss316/Ss316L


Filtration Degree: 10-20 Micros


Open Cover: Rock Arm Cover


Surface Coated: Abrasive Blasting or Sight-Gloss


Fbasket Strainer: Ss304/Ss316


Specification: to be practical


HS Code: 842121999




304 Stainless Steel Bag Filter Housings



1 strainer/filter housings are made in 2 sizes and can serve as basket strainers (for particle retention down to 74 micron size) or as bag filters (for particle retention down to 1 micron size). In all cases, covers are easily removed without special tools.





Features:

Low pressure drops

Permanently-piped housings

Covers are O-ring sealed

Carbon steel or stainless steel (304 or 316)

Easy to clean!

Adjustable-height legs, standard

O-Ring seals: Buna N, EPR, Viton®, PTFE

Duplex unites are available

Pipe sizes 3/4 thru 4-inch, NPT or flanged

Two basket depths: 15 or 30 inches (nominal)





Options:

? Sanitary connections

? Different outlet connections

? Extra-length legs

? Liquid displacers for easier servicing



Unfiltered liquid enters the housing above the bag or basket and passes down through them. Solids are contained inside the bag or basket, where they're easily and completely removed when the unit is serviced.

Fluid bypass around the basket is prevented because the outside diameter of the filter bag seals radially against the housing inside diameter. A single cover gasket is used to seal the opening, and covers can beinstalled and removed without tools.





AAA:



01. What is the capacity (m3/hour)you required for this equipment?

02. What is the material for this bag filter?

Stainless steel (SS304/SS316)?

03. What is the working pressure for it?

04. What is the filtration degree?

10 micron or 200 micron?



Technical parameters of stainless steel bag filters:

Model	Flow rate (T/H)	Inlet and outlet diameter(mm)	Size	Specification	Bag specification (mm)	Filter area (m2)
YL-1-219	20	DN50	219*410	Single bag	180*410	0.23
YL-2-219	40	DN65	219*810	Single bag	180*810	0.46
YL-2-400	50-80	DN80	400*810	Two bags	180*810	0.92
YL-2-500	120	DN100	500*810	Three bags	180*810	1.38
YL-2-600	150	DN125	600*810	Four bags	180*810	1.8
YL-2-650	160	DN125	650*810	Five bags	180*810	1.84
YL-2-750	200	DN150	750*810	Six bags	180*810	2.3
YL-2-800	220	DN150	800*810	Eight bags	180*810	2.5
YL-2-850	240	DN200	850*810	Nine bags	180*810	2.76

Contact us if you need more details on Filter Housing. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Filter、Strainer. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Filter > Bag Filter